ERTEC Hard Surface Guard for Hard Surfaces, Asphalt & Concrete
|Availability:||Contact us for delivery timeframe|
|Delivery time:||Please contact us for delivery timeframe|
|49889006|| HSG 06 - Black
||7 ft. length, 6.0" to 6.5" high|
|49889008||HSG 10 - Black||7 ft. length, 10.0"
Hard Surface Guard is a patented, high performance and cost effective system to provide sediment control on hard surfaces on or around construction sites. Hard Surface Guard is an important part of a comprehensive best management practice system. Hard Surface Guard is designed to flex back and forth in traffic environments and can be reshaped after deformation. The system can be anchored with masonry nails, bonding agents or gravel bags and easily removed when the project is completed. The system is highly reusable. Underflow is controlled by a long lasting geotextile gasket. The system allows water flow-through and significantly reduces velocity while at the same time provides particle filtering. It is made from durable and recyclable HDPE.
Hard Surface Guard is used to control sediment movement offsite or into drain inlets from hard surfaces. It has a gasket attached under the horizontal member to prevent or filter under flows and also has an integrated filter.
There are several ways to attach hard surface guard to the ground: bonding agents, masonry nails (above), gravel bags, concrete anchors, etc. Attachment with a powder actuated nail gun is fast. Use 1.5″ nails with 1″ washers, spaced about 2′ apart, for good holding power. Hard Surface Guard can also be used to reduce total solids from entering grated inlets on hard surfaces.
Hard Surface Guard can be used to keep stockpiles in their place.